Resin Coating for Marble & Stone in New England

Marble countertops are beautiful, until the first wine spill leaves a dull etch mark that never goes away. All Stone Shield installs Alurex and RAKU resin coatings that stop acid etching and staining before they happen. Owner Martin Gibek personally handles every consultation and installation across Connecticut, New York, Massachusetts, and New Jersey. Call (203) 429-0039 to speak directly with Martin and protect your stone surfaces for good.

Contact us

The Real Cost of Unprotected Marble

You bought marble because you wanted elegance and durability. Then came the first lemon slice that left a cloudy ring. The coffee mug that left a faint stain. The red wine that etched into the surface before you could wipe it up. Every spill becomes a permanent reminder that marble, despite its beauty, is vulnerable. Acid etching happens instantly. The moment acidic liquids touch the surface, they dissolve the calcium carbonate in the stone. No amount of scrubbing brings back the shine.


Traditional stone sealers don't solve this problem. They might slow down staining by filling in the pores, but they do nothing to prevent etching. Sealers wear off after a few months and require constant reapplication. They're maintenance products, not protection systems. If you want to actually stop the damage, not just delay it, you need a barrier that sits on top of the stone and blocks acids from ever reaching the surface. That's where resin coatings come in.

Alurex

Resin Coating That Actually Protects

Alurex is a UV-cured resin coating designed specifically for natural calcium-based stones like marble, travertine, and limestone. It forms a crystal-clear, invisible barrier on the surface of the stone that stops acid etching in its tracks. When lemon juice, wine, vinegar, or coffee hits an Alurex-coated surface, it sits on top of the resin, not on the stone itself. You wipe it up without worry. The coating is four times harder than leading alternatives, which means it resists scratches, wear, and daily abuse far better than traditional sealers or softer coatings.


Alurex is food-safe, which means you can prepare meals directly on the surface without concern. It's also a zero-VOC product, so the application process is safe for indoor air quality. No harsh fumes or long cure times that force you out of your home. The coating is UV-stable and non-yellowing, so it stays crystal clear even in sunny kitchens or bathrooms. You can choose between a honed or polished finish depending on the look you want. If the coating ever gets damaged, it's repairable. Martin can touch up specific areas without redoing the entire surface.


The application process involves professional surface preparation, even application of the resin, UV curing to harden the coating instantly, and a final inspection to ensure a flawless finish. The result is a surface that looks exactly like your original stone but performs like an engineered material.

RAKU

The No-Etch Solution for Marble and Terrazzo

RAKU, manufactured by Lantania, is a one-component no-etch coating designed for marble, agglomerate marble, concrete, and terrazzo. It protects against the same culprits that damage uncoated stone: lemon, tomato, wine, soap, perfume, water, oil, and coffee. The key benefit of RAKU is that it does not change the appearance of your stone. It won't yellow over time, and on smoothed or brushed surfaces, it may even enhance the original color with a subtle, pleasant brightness.


RAKU is highly resistant to UV rays and high temperatures, making it ideal for both residential and commercial applications. It works beautifully on new installations and can also be applied to existing stone that's already in place. It's particularly well-suited for countertops, bathroom vanities, bar counters, and decorative furnishings where appearance and protection both matter. If you want the natural look of your stone preserved while gaining serious protection against everyday damage, RAKU delivers exactly that.

Why All Stone Shield Is the Right Choice

All Stone Shield is not a national chain. We're not a DIY kit company. We're a local, owner-operated business with deep roots in New England home improvement. Martin Gibek has 22 years of hands-on experience in the industry, and he personally handles every customer call and consultation. When you contact All Stone Shield, you speak directly to Martin. Not a call center, not a sales rep, not an automated system. He evaluates your specific stone, discusses your concerns, and recommends the right solution for your needs.

Martin assesses each project individually. Not every stone needs the same treatment, and not every homeowner has the same priorities. Some clients need the maximum hardness and scratch resistance of Alurex. Others prefer the subtle enhancement and no-change appearance of RAKU. Some are better served by StoneGuard® film. Martin walks you through the options and explains the pros and cons of each. His goal is to match you with the right product, not upsell you on something you don't need.


All Stone Shield serves all of New England: Connecticut, New York, Massachusetts, and New Jersey. Whether you're in Stamford, Manhattan, Boston, or Newark, Martin brings the same level of personal attention and professional installation to your project. Call (203) 429-0039 or email sales@allstoneshield.com to schedule a free consultation.

What to Expect: Our Process

Consultation

Martin personally evaluates your stone surfaces, discusses your lifestyle and usage patterns, and recommends the coating that makes the most sense for your situation. He explains the benefits, limitations, and maintenance requirements of each option so you can make an informed decision.

Preparation

The surface is professionally cleaned and prepared to ensure proper adhesion. Any existing sealers, residues, or contaminants are removed. Proper prep work is critical to the longevity and performance of the coating.

Application

The coating is applied evenly and carefully by Martin or a certified technician. The process is precise. Every inch of the surface is covered, edges are sealed, and the application is checked for consistency.

Curing and Finish

For Alurex, the coating is cured using UV light, which hardens it instantly. For RAKU, the curing process follows the manufacturer's specifications. Martin inspects the finished surface to ensure it meets his standards. Your countertops are ready to use the same day.

Ideal Surfaces and Applications

Alurex and RAKU coatings work on a wide range of natural stone surfaces in both residential and commercial settings. Kitchen countertops made of marble, travertine, or limestone benefit from complete protection against acids, oils, and daily wear. Bathroom vanities stay pristine even with exposure to soap, perfume, and water. Tables and bar tops in homes or restaurants can withstand spills without permanent damage. Hotel lobbies, reception desks, and high-traffic commercial surfaces maintain their appearance under constant use. Decorative stone walls and floors gain an extra layer of durability without losing their natural beauty.

Frequently Asked Questions

  • How long does Alurex or RAKU coating last?

    The lifespan depends on usage and maintenance. Both coatings are designed for long-term durability, and both are repairable if they sustain damage. Martin provides specific care instructions after installation to help you maximize the life of the coating.

  • Will the coating change how my stone looks?

    Alurex forms a crystal-clear barrier that's virtually invisible. RAKU does not yellow or alter the appearance of the stone, and on certain finishes, it may enhance the natural color slightly. Both coatings preserve the look of your stone while adding protection.

  • Is it safe to use on kitchen countertops where food is prepared?

    Yes. Alurex is food-safe and does not transfer harmful substances during normal contact. You can prepare meals directly on the surface without concern.

  • Can the coating be repaired if it gets damaged?

    Yes. Both Alurex and RAKU are repairable. If a specific area sustains damage, Martin can touch up or recoat that section without redoing the entire surface. This makes them practical long-term solutions.

Protect Your Stone Surfaces the Right Way

You invested in natural stone because you wanted beauty and quality. Now it's time to protect that investment with a coating system that actually works. All Stone Shield brings 22 years of experience, personal service, and proven resin coating technology to every project. Martin Gibek personally handles every consultation, and he's available to answer your questions and provide a free quote. Serving Connecticut, New York, Massachusetts, and New Jersey.


Call (203) 429-0039 or email sales@allstoneshield.com to schedule your consultation and stop worrying about the next spill.